Knowing The Right pH For Nutrients In Aerogarden Plants

Knowing The Right pH For Nutrients In Aerogarden Plants


Hi, just letting you know that all products recommended here have been used by me, or are properly researched to ensure they are the best you are getting without bias.

I am also an affiliate for certain Amazon products and this means that some links here are affiliate links. If you purchase an item through any of them, I MAY earn a commission at no extra cost on you.

For planted seeds to germinate in rich soil (loamy soil), some factors are taken into consideration. These factors include; the moisture content of the soil, the level of soil fertility, the conformation and location of the soil (in other words, soil located on the hills and slopy areas are not good for sowing seeds), and most importantly, the pH of the soil.

Miracle-Gro AeroGarden 3 SL Review | PCMag

Acidic and Alkaline defined

Soil can be acidic or alkaline. As an aerogarden farmer, your goal is to produce as much as fruits and vegetables. Therefore, the farmer ensures that the soil on which the outdoor farming will be done is not acidic or alkaline. To find out which one, the pH is measured. Therefore, the pH of the soil, water, etc is the level of its acidity and alkalinity present in such soil or water. It can also be referred to as the measure of hydrogen ion and hydroxyl ion concentration concerning soil. This is the core basis for the growth of plants in aerogarden. This is because for a plant to grow, there are requirements that must be met. Imagine, if the soil is as hot as an oven and you decide to plant maize or beans, the heat of the soil will kill the maize and the plant will never grow. You’ll be wondering why the seeds you planted are not growing. This is simply because the soil is not conducive for the seeds to grow. Irrigation of the soil, supplying manure, and other practices could return the farm to normal.

Oftentimes, people ask questions about how this pH can be evaluated. This article will enable you to understand what it takes for the pH of an aerogarden to be estimated. This estimation will give you a hint to knowing the right pH for nutrients in aero grade plants. With this information, you get to know that the plants in your aerogarden are thriving because the soil is either acidic or alkaline.

Why are some farmers doing well?

Have you ever wondered why some farmers are doing well and others are not? What is the secret of those farmers that are harvesting healthy crops, year in and year out? Part of their success story is that they’re doing the right things. The right things I mean, are following the procedures required of a plant to grow and supplying the aerogarden requirements for a plant to survive. Do you expect soil that is highly toxic to yield any produce? Not at all! That’s why you have to purchase any of the recommended instruments, study their mode of function, and use them to determine the pH of your soil before proceeding with farming.

Farming will be very interesting once you’re using the right equipment. As a farmer that you’re, you should have all the instruments at your disposal. As this will make work quite simpler and easier for you.

AeroGarden over the years has been providing fresh, safe food options and it’s the main indoor hydroponic growing system. For you to obtain a high output in your garden, you must ensure that your garden is highly enriched in nutrients. This will enable you to anticipate a high yield. It’s the pH that will give you a hint of the level of soil nutrients. To measure the pH of the aerogarden nutrients, highly ranked instruments from are recommended. This is to enable the farmer not to make unnecessary mistakes in taking the readings of the pH and as well, the nutrients.

Why do you need to know your plant nutrient level?

A prospective farmer who wishes a high yield in his output will ensure that the farm he’s about to cultivate is well nourished. This is as well, observed that prospective pig farmers or poultry farmers ask the same questions on how to get the best output. He will ensure that the stock he is going for, to fill his pen is the best obtainable. This is to enable him to anticipate a high output at the end of the farming and rearing season.

With these illustrations, the level of acidity or alkalinity of the aerogarden and level of nutrient level are paramount to obtain the best of the aerogarden. It is the pH of the garden that will determine the nutrient level of the aerogarden. Without the knowledge of the nutrient level, there is no way the plants in the aerogarden will yield maximum output. With the knowledge of the nutrient level of the garden before establishing to plant, is rest assured that with the best pH, your plants will yield maximum output and blossom.

Simple ways of knowing the right pH for nutrients

The best way of knowing the right pH for nutrients is by measurement of the pH, that is knowing the level of acidity and alkalinity of the aerogarden. You can also know the factors that can either promote acidity or alkalinity of the aerogarden. The pH of a soil is best measured using the scale of 0-14, where 1-6 is the acidic pH and 8-14 is the alkaline pH, and 7 is the neutral pH. The verified pH for optimum growth of a plant is between pH, 5.5 – 6.0. This is a slightly acidic medium. Any pH above this scale or below will not support the growth of the plant. It’s either the pH is abnormally above (alkaline) or below (acidic).

Furthermore, plant nutrients are readily available according to the level of soil pH. For instance, a garden that is normal in pH but the change in the season of the year can alter the pH level of the garden, Once there are any pH changes (either by high pH scale or low), the contents of the garden will surely abruptly change either by the death of plants in the garden or yellowing of the plants. These are indications of change in the pH of the garden.

Practically, yellowing of the veins of the leaves in the garden where there are abrupt changes in the pH is a result of iron deficiency. Iron is one of the nutrients needed for plants for proper nourishment and large output. Most plants thrive in an acidic medium ( 5.5- 6.0) because the pH gives them access to quality nutrients.

Dark soil indicates plant poisoning. This will improve the nutrient, manganese to thrive at a very toxic level. Note also that, a ph level too low (that is, highly acidic), liberates aluminium (which is not a plant nutrient). At a high pH level (that is, highly alkaline), the plant nutrient, molybdenum becomes very toxic to plants.

However, pH and nutrients of the aerogarden are influenced by some factors ranging from change in climatic condition, soil-dwelling organisms such as Clostridium species, type of plant. For instance, legumes like soybeans, clovers, and alfalfa take up more cation in proportion to anions. This will cause the hydrogen ions to be given out from the plant roots to maintain the electrochemical balance within their tissues.

The best pH measuring devices to check aerogarden nutrients

This device below is one of the best measuring device available in the market for testing on aerogardens:

XLUX Soil Moisture Meter

Amongst other instruments, this particular one has rated 4.4 – 5 stars with 20,545 ratings. This means that most users have confirmed this instrument as very efficient for measuring the pH of the aerogarden. The most important feature of this instrument is that no batteries are required. Therefore, it functions properly without a battery. In case, you need to measure the pH of the aerogarden. It can be done easily.

The features of this instrument include:

Reliability: This entails how reliable and efficient this instrument is, in giving out the best results. To ensure that the correct reading is taken. Any farmer using this instrument to measure is rest assured that his readings are correct.


The sensing probe ensures accurate and instant testing results, matching for both indoor and outdoor use. This instrument ensures accurate results of the pH of the aerogarden. With the high ratings, it simply means that it has been used by a good number of people. Therefore, people attest to its accuracy and even, recommend it for others to buy.

 How to use:

Insert the moisture meter into the soil. Wait for about 15 to 20 seconds and you’ll instantly get the test result.

Important tips to note:

  1. It should not be used on hard soil.
  2. It should never be used to test the water or other liquid. It is designed for testing soil only.
  3. Wipe the probe with water, after use.

PH Meter for aerogarden


Readings of the pH from the instruments are standard. Getting the right, efficient and reliable instrument is also very important. As these will help you excel and expand as a farmer. Once your proceeds are top-notch, you will be recommended for lessons and tutorials on how you made things work and as well, get paid.

You may also like...

Leave a Reply

Your email address will not be published.